10
WP33L_BA_K1_12_en_08.fm
1.4 Type Approval and genuine Sauer spare parts
• The Type Approval for the Sauer Compressor is valid under
the condition that parts and components specified and quali-
fied by J.P. SAUER & SOHN are used. The Type Approval is
provided by the Classification Society and the EC Declaration
of Conformity or EC Manufacturer's Declaration. Disregard for
the “specifications“ may cause the Type Approval to expire.
• Only the use of genuine Sauer spare parts will ensure compli-
ance with these ’specfications’ and, therefore, reliable and
safe operation of the Sauer Compressors.
• If non-genuine Sauer spare parts are used, we reserve the
right of exclusion from liability for personal injury and material
damage.
• Genuine Sauer spare parts are supplied with a Certificate of
Conformity and a Certificate of Authenticity. An example of this
document is shown just before the Table of Contents in these
instructions. If spare parts are received without this certificate,
there is a risk that these are not genuine Sauer spare parts. In
such an istance please contact our Customer Service.
Note!
Be aware this is a high-pressure compressor, for your own safe-
ty and for reliable compressor operation, only unse genuine
Sauer parts.
Do not use parts from the
“grey market“!
Only use genuine Sauer spare parts
supplied with a Certificate!
Correct
Incorrect
To Next Page
Loading...
