34
WP33L_BA_K1_12_en_08.fm
5.3 Installation
For proper installation observe the installation instructions and
the following.
Installation
conditions
– The installation area must be dry and free from dust.
– Ensure that the installation is ventilated in such way that the
heat generated during operation is removed.
– Operational:+5°C … +55°C
(If it is intended to operate the compressor outside this temper-
ature range, please contact J.P. SAUER & SOHN for written
approval.)
Note!
If in doubt regarding the suitability of the intended place of instal-
lation, please contact J.P. SAUER & SOHN. Sauer can provide
help with the design of a ventilation, system if required.
To Next Page
Loading...
