46
WP33L_BA_K1_12_en_08.fm
6.4 Routine operation
Cleaning • Keep compressor area clean.
• Keep indicators and control elements clean.
Checks • Inspect connections, pipes and electric cables for damage.
• Check the oil level once a week before starting, top up, if nec-
essary. Do not overfill with oil beyond the maximum mark.
Operation 1. Turn power supply on.
2. Set operation mode selector to “Auto“ to operate the com-
pressor in Automatic mode.
Observation • Pay attention to abnormal operating noise.
• Pay attention to leaks (compressed air, oil, condensate).
• For any deviation see Chapter 7 "Troubleshooting”.
To Next Page
Loading...
