32
WP33L_BA_K1_12_en_08.fm
5 Transport and Installation
5.1 Transport
Shipping The machine is packed suitable for Shipping.
• Immediately on receipt of the Sauer Compressor it should be
checked for completeness and any damage.
• The transport company and J.P. SAUER & SOHN must be no-
tified immediately of any damage to the packing or the ma-
chine.
Transport The Sauer Compressor must be transported by a forklift truck or
hoisted by a crane.
Danger!
Suspended load when transported.
The forklift truck/crane must have sufficient load bearing capaci-
ty.
• Ensure that no personnel are within the danger area of the
suspended load and the forklift truck/crane.
• Sling the unpacked compressor at the three lifting eye bolts
(two lifting eye bolts at the motor, one lifting eye bolt on the
crankcase, see illustration). Protect the pipe sling location
against scratching.
• Lift, move, and set down carefully.
To Next Page
Loading...
