Sauer WP 33 L - Connecting the Compressor

Transport and Installation
WP33L_BA_K1_12_en_08.fm
37
5.4 Connecting the Compressor
Pipelines The compressed air outlet and the oil / water lines for the Sauer
compressor must be flexibly connected to any final customer sys-
tem piping.
Danger!
The compressor should only be connected by a qualified techni-
cian. Any work on the electrical installation must only be carried
out by a qualified electrician.
Note!
The crankcase vent is protected with an insulating hose. Do not
take away this insulating material.
High pressure hose
for compressed air
Insulation
Drain valve
Oil / water
Danger!
Compressed air escapes from the drain outlets when the
compressor starts and when the condensate is drained. Do not
operate the compressor without the hose lines connected.