76
WP33L_BA_K1_12_en_08.fm
9.3 Removing
Removing 1. Turn compressor off and disconnect from power supply.
2. Make sure by reading the gas pressure display that the com-
pressor is completely relieved of pressure.
3. Disconnect mains supply cables.
4. Remove oil and lubricants for safe disposal.
5. Drain any remaining condensate, again for safe disposal.
Disposal
Material / Component Safe disposal
Lubricants Hazardous waste
Steel / iron Metal scrap
Electric cables Hazardous waste
Electronic components Electronic waste
Plastics Hazardous waste
To Next Page
Loading...
