Sauer WP 33 L - Torque, Oil Change, and Connections

54
WP33L_BA_K1_12_en_08.fm
8.4 Table of tightening torques
Note!
Always check the compressor after 50 hours following any
maintenance work. Check all screws affected by the mainte-
nance work to see if they are tight.
Bolt(s) / Screw(s) Tightening torque
Cylinder head screws 1
st
stage
38 Nm
Cylinder head screws 2
nd
stage
38 Nm
Connecting rod screws 1
st
stage
50 Nm
Connecting rod screws 2
nd
stage
50 Nm