42
WP33L_BA_K1_12_en_08.fm
5.7 Installation checks before the initial start
– Verify electrical connection corresponds with the nameplate?
– Check all air connections are propperly installed. Pay special
attention to the compressed air outlet.
– Are drain lines properly connected? See section “Drainage”.
– Has the crankcase been filled with oil?
– Have all tools and foreign objects been removed from the com-
pressor?
– Check cooling air intake is not restricted or blocked in any way.
– Air filter turned from transport position to operating position?
– Is the entire Unit clean?
To Next Page
Loading...
