To Next PageTo Next Page
Need help?Do you have a question about the Savant HST-SIPA1SM and is the answer not in the manual?
General| Brand | Savant |
|---|---|
| Model | HST-SIPA1SM |
| Category | Stereo System |
| Language | English |
Classifies safety information types like NOTE, IMPORTANT, CAUTION, and WARNING.
Details hazards and disconnect procedures related to electrical shock.
Advises using two installers for heavy equipment to prevent injury.
Guides on the physical installation of the IP Audio Studio unit.
Explains integrating the device into the Blueprint configuration.
Details how to connect IR emitters using a 6-pin plug-in connector.
Explains RS-232 connections using a 6-pin plug-in connector.
Describes wired (RJ-45) and wireless network connections.
Details speaker, analog, and digital audio input/output connections for various models.
Mentions WiSA certification for HST-STUDIO55WS-SUR and setup via Pro App.
Covers AC power connection, surge protection, and fuse replacement.
Details mounting options for the HST-SIPA1SM, including side and rack mounting.
Covers TV mount hardware and bracket selection for HST-STUDIOxx.
Explains the use of UMB Stabilizers for VESA mounting when points are narrow.
Shows example configurations for Savant Host and IP Audio device in Blueprint.
Guides on replacing the default Host Profile with a specific device profile.
Details adding the Host to the Layout Window and configuring its properties.
Explains adding the IP Audio device Profile in Blueprint for control and audio.
Describes setting up the Audio Interrupt Service (AIS) for doorbells.
Instructions on how to access the device's Web User Interface via IP address.
Explains the information displayed in the Status tab of the Web UI.
Details network settings like IP address, subnet mask, and router in the Web UI.
Details configuration of audio inputs/outputs for HST-SIPA1SM in Web UI.
Details configuration of audio inputs/outputs for HST-STUDIOxx-2CH in Web UI.
Details configuration of audio inputs/outputs for HST-STUDIO55WS-SUR in Web UI.
Covers the Calibration tab for WiSA certified devices in the Web UI.
Details the Firmware tab for managing device modes (Host/Subordinate).
Guidelines for connecting Savant devices to the local network.
Specifies AVB/TSN switch requirements for AVB communication.
Recommends DHCP reservation for IP address management.
Covers legal disclaimers, patent information, copyright, and trademarks.
Provides contact information for Savant support and sales.
