SBC PCD2.M170 - Maintenance; Changing the battery on the PCD1.M13 x and PCD2.Mxxx CPUs; Updating firmware

Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
Content
0-6
0
A.2.1 RS-232 ....................................................................................................... A-2
A.2.3 TTY / currentloop ........................................................................................ A-4
A.3 Protocols on serial ports ................................................................................. A-5
A.3.1 Protocolssupportedbythermware .......................................................... A-5
A.3.2 Protocols implemented in the user program............................................... A-5
A.4 Installation direction and relays contact protection ......................................... A-6
A.4.1 Installation direction for switching low voltages .......................................... A-6
A.4.2 Installation direction for switching higher voltages ..................................... A-6
A.4.3 Switching inductive loads ........................................................................... A-8
A.4.4 Relay manufacturer’s information on RC unit dimensioning ...................... A-8
A.5 Order codes .................................................................................................... A-10