Back Light OFF Time
Back Light on timing can be set up in the range from 1minute ~ 60minutes by minute unit steps
with the “F2” (Edit) Key or UP/DOWN keys. Default setting time is 10 minutes.
PC Interface ON / OFF
PC Interface can be set to ON / OFF in the User’s Menu.
Default Mode is ON.
LCD Contrast
Adjusts the LCD display brightness to the measuring environment conditions.
Adjust Level range from 1~10. Lower number makes screen brighter, higher number becomes
darker.
Factory Default setting is at “5”.
Auto Hold Threshold
Auto Hold is the feature that data is automatically held on the display when it exceeds the
preset level compare to the Initial value.
Factory default setting level is 5%. The adjustable range is between 1 % ~ 30 % in the
User Menu.
Recording Threshold
In Data Logging modes, it records the difference in value from the Threshold compared
with previous data stored.
Factory default setting level is 5%. The adjustable range is between 1 % ~ 30 % in the User
Menu.
Calibration
Calibration Mode of Meter is available in the User Menu.
Firmware Update
Future Firmware Updates can be completed using the following Procedure:
Select (Update Firmware) in the User Menu.
Download the Updated Firmware to the PC
Connect the USB Cable between PC and the Meter
Press “Enter” key on the Meter.
When the Update is finished, the message “Finish” will be displayed on the screen.
System Information
Meter System Information is listed in the User Menu.
System information includes Model, Firmware version, Results of last Self calibration.
Language
Display Text is written in English.
To Next Page
Loading...