- DC Voltage: 50㎷ ~ 1000V
- DC Current:
500㎂~10A
Ripple Noise(Dual Mode) Measurement
Useful for measuring AC Noise on DC Power Circuits.
Will measure Ripple Noise values below 100 kHz.
Easy to accomplish measurement without the need of an O-scope..
-DC Voltage, AC Voltage measurements both display on the LCD screen.
This unique function is different from AC+DC Measurement function of the Meter.
- Measure DC Voltage and AC voltage in Order in display.
- DC/V Range:
5V~1000V.
- AC/V Range:
50㎷~500㎷.
- ripple Noise Frequency is displayed simultaneously.
- Measured Values Auto Hold on the display. Reset to take next measurement values.
Signal Out ( )
To Next Page
Loading...