Main menu
OPM 520 en-GB 22
© Scania CV AB 2018, Sweden
Active Station
The button is only on any additional display, not
on the main displays.
Here, you activate and deactivate the option for
the auxiliary display to have active display sta-
tus, i.e. Active Station. This means that the auxil-
iary display controls the engine.
There may be several auxiliary displays in the
system controlling the same engine, but only one
auxiliary display can be active at any time.
Activating Active Station status
How to request that the auxiliary display become
an active display:
• Select an engine and press Request.
A request is sent to the auxiliary display which
currently has active display status.
If the engine icon has a yellow star in the status
bar at the top of the window, as in the illustration,
this means that the engine is currently being con-
trolled by this auxiliary display.
If there is only one auxiliary display in the sys-
tem, it still may not be the active display.
When you have activated Active Station once,
the setting is saved, even when the auxiliary dis-
play is restarted.
Deactivating Active Station status
If you deactivate the Active Station status for the
auxiliary display, other auxiliary displays with
lower priorities can control the engine. Proceed
as follows:
• Select an engine and press Release.
347 965
Auxiliary # 8 - Running
Active Station
Running
[This Station]
Auxiliary #8
Request Release
To Next Page
Loading...