18
©
Scania CV AB 1997 01:01-02
Program 96
8. Fit the pushrods and rocker arm mechanism.
Tighten the rocker arm mechanism bolts to
150 Nm.
9. Check valve clearance as described in Valve
clearance, checking and adjusting on page 5.
10. Check that no old seal remains in the injector
hole. Fit the injectors complete with new
seals.
11. Tighten the injectors to 70 Nm using tool
99 308.
12. Fit the rocker covers and tighten them to
20 Nm.
13. Fit delivery pipes and tighten to 20 Nm using
socket 99 310. Fit leak-off pipes, coolant
manifold, intake manifold and exhaust mani-
fold with new gaskets and seals.
14. If the exhaust pipe has been removed and dis-
mantled, joints should be lubricated using
lubricant 561 205 when reassembling.
To Next Page
Loading...
Need help?
General
