23
SCClub operating instructions
Commissioning
* Unpack the Schaerer Coee Club and set the
coee machine on a stable, horizontal surface .
* Observe the technical data.
* Plug the connection cable of the coee machine
into the respective socket.
3.3 Commissioning programme
* Switch on the coee machine using the on/o
switch.
The coee machine switches on.
The commissioning programme starts.
* Follow all instructions on the display.
The commissioning programme
proceeds step-by-step through the further
commissioning process via the display.
> Follow the display messages.
• The set values can be changed after
commissioning.
Other instructions
• Connecting milk w Chapter 4.6 page 27
Once the commissioning process has been run in its
entirety and all necessary settings have been made,
the coee machine restarts. Calibration is performed
automatically.
Risk of burns/
Danger of scalding
• Hot liquid comes out of the outlets during
beverage dispensing. The adjacent
surfaces and outlets get hot as well.
> Do not touch the area under the outlets
during beverage dispensing.
> Do not touch the outlets immediately after
dispensing.
Technical data
wpage 107
IMPORTANT
Changing settings
w Setting
from page 37
CAUTION
Observe the Safety chapter
w from page 9
To Next Page
Loading...
Need help?
General
