Schaerer Coffee Club - Readiness for Use

39
SCClub operating instructions
Software
5.2 Readiness for use
Ready for operation display
The display shown when the machine is ready for use
depends on the options of the co󰀨ee machine and
individual settings.
5.2.1 Ready for operation display elds
Beverage buttons
All output-ready beverage buttons are illuminated.
Swiping the display vertically shows the other
beverages available for display. The beverage
dispensing starts after tapping on the desired
beverage button.
Warm rinse eld
* Tap the "warm rinsing" eld.
A process of rinsing the coee lines with warm water
starts. The water warms up the brewing system and
ensures that the brewed coee is at an optimum
temperature.
This is recommended after a long brewing pause,
especially before dispensing a cup of espresso.
Barista eld – co󰀨ee strength
Display Co󰀨ee strength
Standard 2 beans Normal, as set
Tap 1 x 3 beans 15% stronger than set*
Tap 2 x 1 bean 15% weaker than set*
* Maximum co󰀨ee ground quantity 15 g per brew
The coee strength is changed one time for the next
brew.
Button layout
w Operating options
page 50
Example: Cappuccino button
Warm rinse eld active/inactive
w Operating options
page 51
Barista eld active/inactive
w Operating options
page 50