91
SCClub operating instructions
Care
* Thoroughly clean the individual parts of the
positioning screw with the supplied cleaning brush
* Let the powder container and the individual parts
dry completely
* Reassemble and install the portioning screw and
screw on the cap nuts
Ensure that discharge cap is correctly
positioned.
* Fill the powder container and put on the lid
* Close the lock
Powder container extension (optional)
* Unlock the extension
* Remove the extension upwards
* Thoroughly wipe the extension with a damp cloth
and let it dry
* Put on the extension and lock
Portioner with individual parts
Portioning screw
IMPORTANT
To Next Page
Loading...
Need help?
General
