www.schaerer.com Programming
Display/ Display text (MDB) Parameter description Setting
range
Notes
Expert options Configuration of accounting parameters based
on the selected optional accessories and functi-
ons.
Option: Coin devices and card readers
The following additional settings are displayed
for selected card readers, coin testers or coin
changers:
• Max. credit [99.99]
• Max. return [0.00]
• Display at unit [no]
Numerical
entry
[Max. credit]: Disables the
coin unit once set credit li-
mit has been reached.
[Max. return]: Limits the re-
turn amount.
[Display at unit]: For a card
reader device with an inte-
grated display.
Option: Select text
The following selection is available depending
on the payment system selected:
• [no display] text
• [Insert token] text
• [Please card] text
• [Insert money] text
• [Bank note] text
► Click to scroll to the required text.
Click to scroll –
Option: General settings
The following settings are independent of the
payment system selected.
• Timeout request [60]
• Auto reset [No]
• 2 price lines [Yes]
• Tap & Go [No]
• Disable LA [No]
• Disable EVA reset [No]
• EVA event send [No]
• MDB single mode [No]
Schaerer AG recommends consulting a Schaer-
er payment systems specialist to determine the
required settings.
Numerical
entry
Yes / No
[Timeout request]: Time li-
mit for payment.
[Auto reset]: Cancels pay-
ment if no confirmation oc-
curs after the "Timeout
request".
[2 price lines]: A separate
price line for each bevera-
ge level.
[Tap&Go]: No-touch pay-
ment system with money
card. Beverage dispensing
after card is held up to de-
vice one time.
[Disable LA]: Sending of
the LA protocol for EVA-
DTS can be disabled.
BA SCV_EN
V06 | 11.2015
78