OPERATION
XH1500/XH1000 06-24 Operation Section 4-25
OPERATION
© 2024 Alamo Group Inc.
ROTARY MOWER PRE-OPERATION INSPECTION
Mower ID# ____________________
Date:________________________
Make:_______________________
Shift:________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped
and the tractor is in park with the parking brake engaged. Make sure the mower is resting on
the ground or securely blocked up and all hydraulic pressure has been relieved.
Operator’s Signature: ____________________________________________
Item
Condition
at Start of Shift
Specific Comments
if not OK
The Operator’s Manual is in the canister on the mower
All safety decals are in place and legible
The tongue/hitch connection bolts and pins are tight
There are no cracks in tongue or hitch
The tow chain is secured to the tractor and mower
The hydraulic cylinder pins are tight
There are no leaking or damaged hoses
The mower deck is clear of cut grass and debris
Chain guards/deflectors are in place and in good condition
Driveline/gearbox shields are in good condition
Driveline clutches are in good condition, not frozen
Driveline telescoping members and U-joints are lubricated
Driveline yokes are securely attached to PTO and mower
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Blade carrier retaining nut is tight
Blades are not chipped, cracked or bent
Blade bolts are tight
Wheel lugs are tight
Transport locks are in good condition
Proper hourly greasing as per Operator’s Manual
IMPORTANT: Scan
this QR Code for
an electronic copy
of this inspection
sheet.
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
To Next Page
Loading...