Table of Contents
4 06.00 | DRG | Assembly and operation manual | en | 389041
5.3 Mounting the sensor............................................................................ 22
5.3.1 Overview of sensors .................................................................... 22
5.3.2 Mounting inductive proximity switch IN .......................................... 22
5.3.3 Mounting inductive proximity switch IN 80...................................... 24
5.3.4 Mounting magnetic switch MMS 22 ................................................. 26
5.4 Setting the opening angle limits............................................................. 27
5.4.1 DRG 44 - 80 .............................................................................. 27
5.4.2 DRG 100.................................................................................... 28
6 Troubleshooting................................................................................... 29
6.1 Procukt does not move......................................................................... 29
6.2 Product is not executing the complete stroke ............................................ 29
6.3 Product opens or closes abruptly ............................................................ 29
6.4 Product does not achieve the opening and closing times ............................. 30
6.5 Gripping force is dropping..................................................................... 30
7 Maintenance ....................................................................................... 31
7.1 Notes................................................................................................ 31
7.2 Maintenance and lubrication intervals..................................................... 31
7.3 Lubricants/Lubrication points (basic lubrication) ....................................... 31
7.4 Disassembly and assembly .................................................................... 32
7.4.1 Type 44 - 80 ............................................................................. 32
7.4.2 From type 100 and up ................................................................. 33
7.5 Servicing and assembling the product ..................................................... 34
7.5.1 Assembling with assembly device .................................................. 35
7.5.2 Assembly device......................................................................... 36
7.6 Drawings........................................................................................... 38
8 Mounting kit proximity switch................................................................. 40
9 Translation of the original declaration of incorporation ................................. 41
10 UKCA declaration of incorporation ............................................................ 42
11 Information on the RoHS Directive, REACH Regulation and Substances of Very High
Concern (SVHC) ..................................................................................... 43
To Next Page
Loading...
