SCHUNK EGP Series User Manual

Technical data
20
11.00 | EGP | Assembly and Operating Manual | en | 389476
3.1.4 EGP 64
Designation EGP 64
Supply voltage [VDC]
Min. [VDC]
Max. [VDC]
24
21.6
26.4
Min. Supply current power
supply unit [A] * 2.0
Max. Current input [A]** 2.0
Gripping force [%] 25 50 75 100
Current input in blocked
state [A] ***
0.04 0.08 0.1 0.15
Designation EGP 64 IO-Link
Supply voltage [VDC]
Min. [VDC]
Max. [VDC]
24
21.6
26.4
Min. Supply current power
supply unit [A] *
2.0
Max. Current input [A]** 2.0
Gripping force [%] 25 50 75 100
Current input in blocked
state [A] ***
0.04 0.08 0.1 0.15
End position detection
tolerances [mm]
(in delivery condition / after
stroke measurement) ±0.5
Integrated electronic control unit
Communication interface IO-Link
Specification: V1.1
Transmission rate COM2
Port Class B
* minimum supply current for reliable operation of product
** maximum current input in the acceleration phase (max. t = 50 ms)
*** Current input in blocked state (in gripper end position or
while gripping a workpiece) with active command "Open
Gripper" or "Close Gripper"
More technical data is included in the catalog data sheet.
Whichever is the latest version.

SCHUNK EGP Series Specifications

General

Brand	SCHUNK
Model	EGP Series
Category	Industrial Electrical
Language	English