General
6
11.00 | EGP | Assembly and Operating Manual | en | 389476
1.1.3 Symbol definition
The following symbols are used in this manual:
■ Prerequisite for an action
Ø Action
✓ Intermediate result
✔ Final result
1.1.4 Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
• IO-Link variant: Software guide "SCHUNK gripper with IO-Link"
*
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
1.1.5 Sizes
This operating manual applies to the following sizes:
• EGP 25
• EGP 40
• EGP 50
• EGP 64
1.1.6 Variants
This operating manual applies to the following variations:
• EGP
• EGP Speed (S)
• EGP IO-Link
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.
1.3 Scope of delivery
The scope of delivery includes
• Electric Small Components Gripper EGP in the version ordered
• Assembly and Operating Manual
To Next Page
Loading...