SCHUNK EGP Series - Accessories

General
11.00 | EGP | Assembly and Operating Manual | en | 389476
7
• Accessory pack
1.4 Accessories
The following accessories, which are to be ordered separately, are
available for the product:
• Connection cable 4-pole, socket M8
– angled, 5m
– angled, 10m
– straight, 5m
– straight, 10m
NOTE
When using customer-supplied cable: at least 4 x 0.25mm²
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.