EasyManua.ls Logo

SCHUNK FPS Series - 1 General; 1.1 About this manual; 1.1.1 Presentation of Warning Labels; 1.1.2 Applicable documents

SCHUNK FPS Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General
01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911 5
1 General
1.1 About this manual
This manual contains important information for a safe and
appropriate use of the product.
This manual is an integral part of the product and must be kept
accessible for the personnel at all times.
Before starting work, the personnel must have read and
understood this operating manual. Prerequisite for safe working
is the observance of all safety instructions in this manual.
1.1.1 Presentation of Warning Labels
To make risks clear, the following signal words and symbols are
used for safety notes.
CAUTION
Material damage!
Information about avoiding material damage.
1.1.2 Applicable documents
l
General terms of business *
l
Catalog data sheet of the purchased product *
l
Assembly and operating manual for the SCHUNK module on
which the FPS is used *
The documents labeled with an asterisk (*) can be downloaded
from schunk.com/downloads.
The software can be downloaded from schunk.com/software.
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
l
Observe the applicable documents, }1.1.2 [/5]
l
Observe the ambient conditions and operating
conditions, }2.3 [/7]
1.3 Scope of delivery
The scope of delivery includes
l
Electronic processor FPS-F5 in the ordered model
l
Assembly and Operating Manual
l
SUB-D serial connector

Table of Contents

Other manuals for SCHUNK FPS Series

Related product manuals