Basic safety notes
12 04.00 | SVH | Assembly and Operating Manual | en | 389734
2.7 Notes on particular risks
Generally valid:
l
Remove the energy supplies before installation, modification,
maintenance, or adjustment work.
l
Make sure that no residual energy remains in the system.
l
Do not move parts by hand when the energy supply is
connected.
l
Do not reach into the open mechanism or the movement area
of the unit.
l
Perform maintenance, modifications, and additions outside
the danger zone.
l
Secure the product during all operations against uncontrolled
activation.
l
Take a precautionary approach by maintenance and
disassembly.
l
Only specially trained staff should disassemble the product.
l
Ensure that the operating personnel are fit for use.
WARNING
Risk of injury from unexpected movements of the machine/
system!
WARNING
Risk of injury due to hot surfaces.
In high ambient temperatures, it is possible for the product to be
exposed to excessive heat, causing the surfaces to become hot.
l
Wear protective gloves.
l
Allow the product to cool to at least 40°C before touching it.
WARNING
Risk of injury due to sudden movements in case of EMC
malfunctions!
If the EMC directive is not observed when connecting the product,
malfunctions in the control units and drives can cause
unexpected machine movements.
l
Observe the EMC directive when connecting the product.
To Next Page
Loading...