SCHUNK SVH - Notes for Integrators

Basic safety notes
04.00 | SVH | Assembly and Operating Manual | en | 389734 13
WARNING
In case of overload, risk of injury due to sudden movements!
If the product is overloaded, the integrated brake will no longer
function properly. This may result in sudden machine
movements.
l
Operate the product within the specifications defined at all
times.
WARNING
In case of product malfunction, risk of injury due to sudden
movements!
Electrical devices are not generally protected against failure.
l
Therefore, the user is responsible for ensuring that the
machine is brought into a safe state in case of product
malfunction.
WARNING
Risk of injury due to sudden movements in case of electrical
malfunctions!
Electrical malfunctions can lead to sudden movements in the
machine.
l
During transport and handling, do not bend any of the
components or change the insulation clearance.
l
To avoid damage due to electrostatic charges, do not touch
the electrical components.
l
Properly execute all grounding, fastening and cabling work in
accordance with applicable regulations.
2.8 Notes for integrators
l
The integrator must verify that the safety-related parts of the
control units meet PL "d" with category3 structure, as long as
a different classification has not emerged from the risk
analysis performed by the integrator.
l
If the product is used on a robot with removable devices and
collaborative operation (e.g. wireless emergency stop), the
requirements for this must be verified by the integrator.