Scireq flexivent - The Flexivent at a Glance

26
an extended period of time (see section 2.6.1). The
flexiVent base unit is shipped with a module
attached. If your instrument includes additional modules, they are shipped in separate boxes.
The following components are part of every
flexiVent FX system:
a flexiVent FX base unit;
one or more flexiVent FX modules;
a power supply;
an Ethernet cable;
one or more FX adapters;
one or more Y-tubing kits;
one flexiWare installation DVD; and
flexiWare and flexiVent FX user manuals.
The system may also contain the following optional components:
Nebulizer setup, which includes
an Aeroneb controller,
an Aeroneb nebulizer,
an FX adapter with nebulizer mount, and
a rainout characterization kit including a drying tube;
a pressure manometer;
one or more UNIT transducers
appropriate Allen keys and screwdriver; and
other product extensions or accessories.
THE FLEXIVENT AT A GLANCE
(OPPOSITE PAGE)
1 BASE UNIT
2 EMBEDDED DISPLAY
3 CONTROLLER
4 MODULE
5 PISTON/CYLINDER SET
6 FX ADAPTER (PICTURED WITH
NEBULIZER AND Y-TUBING ATTACHED)
7 AIR/GAS INTAKE
8 AIR/GAS EXHAUST
9 AUXILIARY PORTS (4)
10 SYNC PORT (IN)
11 SYNC PORT (OUT)
12 ETHERNET PORT
13 POWER CONNECTOR