20
STEP 2. Set the Analyzer
Brief overview of the Analyzer settings
The following table provides an overview of the available settings.
* “Default setting” describes the Analyzer setting at the time of shipping.
Stage Setting Options Default Setting*
1 Beep On, Off On
2 Year YYYY 2011
3 Date Format m-d, d-m m-d
4 Date mm-dd, dd-mm 1- 1
5 Time Format 12h, 24h 12h
6 Time hh:mm 12:00 AM
7 Sample. Type (for Lipid) SE, BL BL
8 Unit of the Test Result mg/dL, mmol/L mg/dL
9 Auto Printing On, Off On
10 Printing Page P-1, P-2 P-1
11
Hypo warning (for glucose)
Off, 60, 70, 80 Off
12 Alarm Off, 4 Alarms Off
To Next Page
Loading...