Sea-Bird Electronics SBE 19plusV2 - Page 69

Section 4: Deploying and Operating SBE 19plus V2
59
Hardware Configuration Commands
The following commands are used to set manufacturing date, PCB serial
numbers, PCB assembly numbers, and auxiliary channel sensor types and
serial number, at the factory.
Factory Settings – do not modify in the field
SetMfgDate=
SetPcbSerialNum1=
SetPcbSerialNum2=
SetPcbSerialNum3=
SetPcbSerialNum4=
SetPcbAssembly1=
SetPcbAssembly2=
SetPcbAssembly3=
SetPcbAssembly4=
Auxiliary Sensor Settings – can be modified in the field to accommodate
changes in auxiliary sensors cabled to the 19plus V2
SetVoltType0=
SetVoltSN0=
SetVoltType1=
SetVoltSN1=
SetVoltType2=
SetVoltSN2=
SetVoltType3=
SetVoltSN3=
SetVoltType4=
SetVoltSN4=
SetVoltType5=
SetVoltSN5=
66