F22L0PY
1
2
1. Slide seat rearward
2. Firmly push seat down
Ensure the seat is properly locked by
pulling up on it.
WARNING
To avoid loss of control, always
ensure that the seat is properly
locked in prior to operating the
watercraft.
Adjust steering to the desired posi-
tion before use. Refer to HANDLE-
BAR ADJUSTER.
CAUTION: Never ride with the
“moto” seat resting directly on the
deck as the seat could damage the
deck.
F22L17Y
“Moto” Seat Stowage
Unlock the seat post by lifting the red
locking lever while fi
rmly holding the
steering pole by the handlebar.
NOTE: Pushing down on
handlebar
can ease to unlock seat.
F22L0QY
1
1. Hold steering pole
Push the seat forward so that the seat
post becomes vertical. Lift the seat to
release the post from its receiver.
F22L0RY
1
1. Seat post vertical
Keep the seat high enough and rotate
the post into seat.
42
______________________
To Next Page
Loading...
Need help?
General