F22L0KY
1
1. Release button
Pull the “moto“ seat out of the steer-
ing pole.
CAUTION:
Pay attention so that the
“moto“ seat does not rub against
theenginecover.
Rotate the seat out, raise and pull rear-
wards. Hold in this position.
F22L0LY
Keep the seat high enough to pull the
seat post out.
CAUTION:
Ensure to maintain the
seat high enough so as to have
room to pull the seat post out with-
out touching the body.
Pull the red locking lever rearward and
pull the post out of the seat.
F22L0MY
1
1. Lock lever
F22L0SZ
Rotate the post to a vertical position
and move the seat to line up the post
with its receiver.
NOTE: Notice that when rotating
post, it will lock at an intermediate
position. Push the red lever again to
release the lock and continue to rotate
post until it becomes vertical.
_____________________
41
To Next Page
Loading...
Need help?
General