F22L0NY
2
1
1. Post vertical
2. Receiver
Lift the receiver cap and hold open
while inserting the seat post in receiv-
er. Ensure post knuckle is fully insert-
ed into the receiver.
F22L0OY
1
1. Lift receiver cap
To lock post in position:
– Slide seat rearward.
– Firmly push seat down. You should
hear a “clunk“.
F22L0PY
1
2
1. Slide seat rearward
2. Firmly push seat down
Ensure the seat is properly locked by
pulling up on it.
WARNING
To avoid loss of control, always
ensure that the seat is properly
locked in prior to operating the
watercraft.
Adjust steering to the desired posi-
tion before use. Refer to HANDLE-
BAR ADJUSTER.
CAUTION:
Never ride with the
“moto” seat resting directly on the
deck as the seat could damage the
deck.
F22L17Y
“Moto” Seat Stowage
Unlock the seat post by lifting the red
locking lever while fi
rmly holding the
steering pole by the handlebar.
NOTE: Pushing down on
handlebar
can ease to unlock seat.
42
______________________
To Next Page
Loading...
Need help?
General