When you are satisfied with your
choice, stop pressing the button and
it will become active. The display
you have chosen will remain until it is
changed.
Display Priorities
As a self test at start-up, the needles
of the speedometer and tachometer
will sweep to their maximum position,
all LCD segments and the LED will
turn on for 3 seconds each time the
information center is activated (when
safety lanyard is installed). This allows
the driver to validate they are all work-
ing properly.
When the information center is acti-
vated, the last function set will be dis-
played.
In the event of a warning message,
the message will blink and override
the units display unless MODE button
is pressed. The display will then dis-
play the last function after 10 seconds.
If more than one warning message oc-
curs, the blinking messages will scroll
every 4 seconds.
Other Functions
The following describes how to select
other available functions.
Language Option
While in the compass mode:
1
F18L092
1. Press and hold for 2 seconds
1
F18L091
1. Repeatedly press
1
F18L092
1. Press to end
English/Metric System
Allows to display the units in the met-
ric system or in the SAE English sys-
tem.
NOTE: This function is not available
when information center displays the
compass, hourmeter or trip hour me-
ter.
_____________________
39
Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 41
To Next Page
Loading...