11QB2000 9.2022 vers 1.0
Products
Make sure your products are appropriate for the column and coil you are placing them in. Do not force
products that are too wide into a narrow tray or too ght coil as this will cause vend problems for your
customers. The product must also pass under the tray immediately above the one you are loading and should
not touch products on either side.
Once you have the appropriately sized products for each selecon, correct loading of the products should be
between the coils and resng on the product tray itself. See Figures 6 and 6a:
Figure 6 – Load products properly and neatly
Incorrect Incorrect
Correct
Figure 6a –Properly loaded products sell more and vend consistently
Incorrect Incorrect
Correct
You should ensure that the products are loaded like a retail store shelf to ence customers and give a neat,
professional appearance. Make sure packages are upright, facing front and in good condion.
To Next Page
Loading...
