Seaga Quick Break Combo QB2000 - Page 39

39QB2000 9.2022 vers 1.0
6. Press # to Save changes
7. Press * to exit to previous menu
SPACE TO SALES (StS)
This feature is not applicable in this model and must be set to OFF.
1. Press Service Mode Button
2.Press4forConguration
3.Press8forSpacetoSales(StS)
4. Press 8 to Edit
5.Press8totogglethroughoptionstoStSO󰀨
6. Press # to Save changes
7. Press * to exit to previous menu
CUSTOM SPACE TO SALES (StS)
Thisfeatureisnotapplicableinthismodel,seeSpacetoSales(StS)toturnthisfeatureOFF.
ADVANCED CONFIG*
A password is required to enter this menu. The factory default password is 2314. The following
sub-menus are available under this sub-menu:
• Beep Enable • Temp
• Optics Disables • Selection Style
• Motor Type
BEEP ENABLE
1. Press Service Mode Button
2.Press4forConguration
3.Press0forAdvancedCong
4.UsenumberkeystoenterPassword(2314)
5. Press 1 for Beep Enable menu
6. Press 1 to toggle ON/OFF
7. Press # to save changes
8. Press * to exit to previous menu
OPTICS DISABLES
Note: Must be set to ON for this model.
1. Press Service Mode Button
2.Press4forConguration
3.Press0forAdvancedCong
4.UsenumberkeystoenterPassword(2314)
5. Press 2 for Optics Disables menu
6. Press 2 to toggle ON/OFF to set to ON
7. Press # to save changes
8. Press * to exit to previous menu