Seaga Quick Break Combo QB2000 - Page 40

40QB2000 9.2022 vers 1.0
MOTOR TYPE
Note: Must be set to 3-Wire for this model.
1. Press Service Mode Button
2.Press4forConguration
3.Press0forAdvancedCong
4.UsenumberkeystoenterPassword(2314)
5. Press 3 for Motor Type menu
6.Press3totoggleto3-Wire(otheroptions:Solenoid,2-Wire,2-Wire1msor3-WireSlow)
7. Press # to save changes
8. Press * to exit to previous menu
TEMP
Note: Must be set to COLD.
1. Press Service Mode Button
2.Press4forConguration
3.Press0forAdvancedCong
4.Usenumberkeystoenterpassword(2314)
5. Press 4 for Temp menu
6. Press 4 to toggle to Cold
7. Press # to save changes
8. Press * to exit to previous menu
SEL STYLE
Note: Must be set to 3-Digit for this model
1. Press Service Mode Button
2.Press4forConguration
3.Press0forAdvancedCong
4.Usenumberkeystoenterpassword(2314)
5. Press 5 for Sel Style
6. Press 5 to toggle to 3-digit
7. Press # to save changes
8. Press * to exit to previous menu
5. OPTIONS
The following sub-menus are included in the Options Menu:
• Forced Vend • Optical Vend
• Bill Escrow • POS Message
• Multi Vend • Set Point
• Free Vend • Sensitivity Adjust
• Fast Change