Seaga Quick Break Combo QB2000 - Page 52

52QB2000 9.2022 vers 1.0
22. Press * exit to previous menu
23. Press 6 for Stop Time menu
24. Press 6 again or press #
25. Press # to edit
26.UsenumberkeystoenterStopTimein12-hrtimeformat(HH:MM:SS)AM/PM
27. Press # to save changes
28. Press * to exit to previous menu
29.Press7toenterStorageTemp(defaultis62°F)
30.Press7toeditStorageTemp(39°Fto62°F)
31. Press # to save changes
32. Press * to exit to previous menu
33. Press 8 for Lighting menu
34. Press 8 to toggle Lighting ON/OFF
Note:LightingONturnslightso󰀨duringEnergySavinginterval
Lighting OFF leaves lights on during Energy Saving interval
35. Press # to save changes
36. Press * to exit to previous menu
37. Press 9 for Enable menu
38. Press 9 to toggle ON/OFF
39. Press # to save changes
40. Press * to exit to previous menu
PAIR
Not applicable. No motors should be paired.
DEGREES
This function allows you to change from Fahrenheit to Celsius.
1. Press Service Mode Button
2. Press 6 for Advanced Menu
3.UsenumberkeystoenterPassword(2314)
4. Press 8 for Degrees menu
5. Press 8 to toggle between F and C
6. Press # to save changes
7. Press * to exit to previous menu
7. MOTORS
This function displays the motor count. It is a useful, quick diagnostic tool in case of selection
failure and can point out a motor issue if the count is not correct.
1. Press Service Mode Button
2. Press 7 for Motor count display menu
3. Press * to exit to previous menu