PV200/210 Operating Instructions
- 23 -
Operating Altitude 0 to 2000 metres
9 Maintenance
Before removing the PV200/210 battery cover ensure that all test leads
have been disconnected from the instrument. Electric shock danger!
Do not operate the PV200/210 without the battery cover securely in
place.
9.1 Preparing to work on the Solar PV200/210.
Make sure the Solar PV200/210 leads and accessories are disconnected, before
opening the instrument;
Power the unit off.
Disconnect all of the test leads from the unit
9.2 Securing the Solar PV200/210
Under certain conditions safe operation of the Solar PV200/210 can no longer be
assumed:
Visible damage of the instrument case.
Incorrect measurement results.
Recognisable abuse to the instrument due to prolonged storage under improper
conditions.
Recognisable abuse to the instrument due to extraordinary transportation stress.
Check the battery compartment for signs of battery electrolyte leakage.
In these cases, the PV200/210 should be immediately switched off, disconnected from
any test or measurement function and secured to prevent any further use.
9.3 Cleaning the Solar PV200/210
Clean the external case of the Solar PV200/210 with a clean dry cloth.
Avoid using solvents and abrasive scouring agents to clean the external case of the
Solar PV200/210.
Check the battery contacts and compartment are free of electrolytic contamination.
Any contamination of the battery contacts or compartment should be cleaned with a
dry cloth.
9.4 Battery Replacement
Before opening the Solar PV200/210 ensure that it is disconnected from
all voltage! Electric shock danger!
Power the unit off.
To Next Page
Loading...
Need help?
General
