Seca 333 i - 4 Making the Device Operational; Scope of Delivery; Setting up the Device

Making the device operational • 49
English
17-10-06-643-100a/04-2018S
4. MAKING THE DEVICE OPERATIONAL
4.1 Scope of delivery
4.2 Setting up the device
The scale is fully assembled upon delivery.
NOTICE!
Incorrect measurement as a result of force shunt
If the scale and its housing are in contact with something, e.g. a towel,
weight will not be measured correctly.
► Set up the scale so that only its feet are in contact with the ground.
1. Place the scale on a firm, level surface.
2. If present, fit one of the measuring rods available as an option as
described in the relevant assembly instructions.
Not sterile
Do not reuse
Open packaging here
Packaging material can be disposed of through recycling
programs
Component Pcs.
a
Baby scale
1
b
Power supply unit with adapters (depending on model: power supply unit with Euro
connector)
1
c
Type AA batteries, 1.5 V
6
Instructions for use, not shown
1
USA/Japan
Euro
Australia
UK
a
b
c