Seca 333 i - Weighing Technology Data

66 •
17-10-06-643-100a/04-2018S
10.2 Weighing technology data
Ambient conditions, transport
•Temperature
• Air pressure
•Humidity
-10 °C to +65 °C / +14 °F to 149 °F
700 - 1060 hPa
0 % - 95 %, no condensation
Height of digits 20 mm
Power supply
• Power supply unit (model-dependent)
- Power supply
- Maximum current consumption
• Batteries
- Power supply
-Battery type
12 V
Type 500 mA
9 V
6 x type AA, 1.5 V
USB module (model-dependent)
• Current consumption of scanner Max. 500 mA
Supply voltage 100 V - 240 V
Power supply frequency 50 Hz - 60 Hz
Current consumption
• Excluding measuring rod, excluding WiFi interface,
excluding USB interface, excluding background lighting
• Including digital measuring rod
seca 234, WiFi interface
activated, USB interface activated, permanent back-
ground lighting (brightness: 100 %)
26 mA
240 mA
Maximum runtime in battery mode
• Excluding WiFi interface, excluding USB interface,
excluding background lighting
• WiFi interface activated, USB interface activated
approx. 60 hours
power supply unit recommended
Medical device in accordance with Directive 93/42/EEC Class I with measuring function
EN 60601-1:
• Insulated device, protection class II:
• Electrical medical device, Type B:
Type of protection IP20
Duty cycle Continuous duty
Interfaces (model-dependent):
• Barcode scanner
• seca software and hospital information system
USB 2.0
WiFi (IEEE 802.11b/g/n/e/i)
(seca connect 103 configuration software can be
downloaded in the Download area for the device
General technical data
Weighing technology data
Maximum capacity 20 kg / 44 lbs
Minimum capacity 0.1 kg / 0.2 lbs
Graduations 5 g / 0.2 oz
Tare range 20 kg / 44 lbs
Accuracy
• 0 kg to 3 kg / 0 lbs to 6.6 lbs
• 3 kg to 20 kg / 6.6 lbs to 44 lbs
±5 g / 0.2 oz
±0.15 %