62 •
17-10-06-643-100a/04-2018S
CAUTION!
Damage to device
Inappropriate detergents and disinfectants may damage the sensitive
surfaces of the device.
► Use only disinfectants free of chlorine and alcohol which are explic-
itly suitable for acrylic sheet and other sensitive surfaces (active in-
gredient: quaternary ammonium compounds, for example).
► Do not use caustic or abrasive detergents.
► Do not use organic solvents (e.g. white spirit or petroleum spirit).
6.1 Cleaning
► Use a soft cloth dampened with mild soapsuds to clean the surfaces of
the device.
6.2 Disinfecting
Scale 1. Check that your disinfectant is suitable for sensitive surfaces and acrylic
sheet (active ingredient: quaternary ammonium compounds, for example).
2. Follow the instructions for use for the disinfectant.
3. Disinfect the device:
► Moisten a soft cloth with disinfectant and wipe down the device.
► Comply with the intervals: see table.
Measuring rod (if present) 1. Check that your disinfectant is suitable for sensitive surfaces and acrylic
sheet (active ingredient: quaternary ammonium compounds, for example).
2. Follow the instructions on the disinfectant.
3. Disinfect the device:
► Moisten a soft cloth with disinfectant and wipe down the device with
it.
► Comply with the intervals, see table.
6.3 Sterilizing
This device may not be sterilised.
Interval Component
Before every measurement Tray
After every measurement Tray
If required
Display elements,
controls, housing
Interval Component
Before every
measurement
Head stop, foot stop
After every
measurement
Head stop, foot stop
If required
• Controls
•Housing
• Measuring rod with scale
To Next Page
Loading...
