Seca 333 i - Changing Batteries; 9 Servicing; 10 Technical Data; General Technical Data

Servicing • 65
English
17-10-06-643-100a/04-2018S
8.3 Changing batteries
You need 6 AA-type batteries, 1.5 V. To establish the power supply, proceed
as follows:
1. Open the battery compartment.
2. Take the discharged batteries out of the battery compartment.
3. Put the new batteries in the battery compartment.
NOTE
Ensure the correct polarity of the batteries (markings on the battery
holder). If the display
bAtt appears, you have inserted one of the bat-
teries the wrong way round or the batteries have discharged. If batter-
ies are inserted the wrong way round, they must be removed again
immediately.
4. Close the battery compartment.
9. SERVICING
The product must be set up carefully and serviced regularly. Depending on
how frequently the product is used, we recommended servicing at intervals of
3 to 5 years.
NOTICE!
Incorrect measurements as a result of poor servicing
►
Have servicing and repairs carried out exclusively by seca Service or
by an authorized service partner.
► You can find service partners in your area or by
sending an e-mail
10.TECHNICAL DATA
10.1 General technical data
Press!
General technical data
Dimensions
•Depth
•Width
•Height
308 mm
650 mm
110 mm
Net weight
• Scale without measuring rod
• Scale with digital measuring rod seca 234
• Scale with analog measuring rod seca 232 n
approx. 3.7 kg
approx. 5.2 kg
approx. 5 kg
Ambient conditions, operation
•Temperature
• Air pressure
•Humidity
+10 °C to +40 °C / +50 °F to 104 °F
700 - 1060 hPa
30 % - 80 %, no condensation
Ambient conditions, storage
•Temperature
• Air pressure
•Humidity
-10 °C to +65 °C / +14 °F to 149 °F
700 - 1060 hPa
0 % - 95 %, no condensation