MMX
TM
User Guide
11
Menu Mode
Press the button to activate the menu mode. The menu is broken down as follows:
Menu Submenu Description How to Use
1. Reports
Alarm Log View or print the Alarm Log. See page 13.
Event Log View or print the Event Log. See page 13.
Current Levels View or print the Current Levels. See page 14.
Verif. Count View or print the Verified Count. See page 15.
Maint Report View or print the Maintenance Report. See page 16.
Current PWs View or print Pulse Width Current Report See page 17.
Obscuration View or print the obscuration values See page 18.
CO Maint Report View or print CO detector Maintenance Report See page 19.
Battery Voltage View or print Battery Voltage reading See page 20.
2. Bypass
Device/Circuit Bypass/unbypass a Device/Circuit. See page 22.
Relay disc Disconnect/reconnect all relays. See page 25.
Input Zone Disconnect/reconnect input zones per node See page 25.
3. Walk Test
Audible Test Perform an audible walktest. See page 26.
Silent Test Perform a silent walktest. See page 27.
Assisted (if
configured)
Assisted walktest for large systems See page 29.
4. Day/night mode N/A Select day or night mode. See page 34.
5. Set time N/A Set the time and date. See page 35.
6. Clear Event
Log
Alarm Log Clear the Alarm Log. See page 36.
Event Log Clear the Event Log. See page 36.
All Logs Clear all the logs. See page 36.
7. Clear
Verification Count
N/A Clear all verification counters. See page 37.
8. Network
Restart
N/A
Select this once system configuration download
is completed.
See page 38.
9. Config Info N/A Select this feature to view See page 38.
10. Choose
Config
N/A
Select the configuration version you wish to
download into the system.
See page 39.
Note: If you have used the Configurator to program the “Enable Required” option in the Command Menu, the
Command Menu list will appear differently than that which is shown above. Menu option three will read
“Enable Required”, and “Walk Test” will move to menu option four. All subsequent menu options will
similarly be renumbered. For more information on the Enable Required option, see page 33.
To Next Page
Loading...
Need help?
General
