Secutron MMX-2003-12NDS User Manual

12
Front Panel Menu Operation
1. Reports Menu
Use the Reports Menu to print the Alarm Log, Event Log, Current Levels, Verified Counts, Maintenance report,
Current PWs, Obscuration, CO Maintenance report, and Battery Voltage. You can view on screen, or print directly to
a printer connected to the panel, or to your laptop computer.
To enter the Reports Menu, you must be in the Command Menu. To enter the Command Menu, press when
the display is in normal mode.
The following subsections provide instructions on using each Reports Menu option.
Note: To print a report to a printer or to a laptop (using HyperTerminal), the printer output
must be enabled via the Configurator.
Step 1: Select the Reports Menu
1. Use and to scroll the cursor to “Reports”.
2. Press to select the Reports Menu.
Step 2: Enter your passcode (if required)
Enter your passcode. See page 10 for instructions on
entering passcodes.
Step 3: Select the option you would like to view
1. Use and to scroll the cursor through the
menu.
2. Press to select an option.
3. Press to exit and return to the Reports Menu.
Repeat to exit to the Command Menu.
- Command Menu-
1 Reports
2 Bypass
3 Walktest
4. Day/night mode
5. Set time
6. Clear Event Log
7. Clear Verif Co unt
8. Network Restart
9. Config Info
10. Choose Config
^
Enter passcode for
level 1 or higher:
^
- Reports Menu-
1 Alarm Log
2 Event Log
3 Current
4. Verif. Count
5. Maint Report
6. Current PWs
7. Obscuration
8. CO Maint Report
9. Battery Voltage

Secutron MMX-2003-12NDS Specifications

General

Brand	Secutron
Model	MMX-2003-12NDS
Category	Control Panel
Language	English