Front Panel Menu Operation
36
6. Clear Event Log
Select this option if you would like to clear the Alarm Log, Event Log, or all the logs.
To enter the Clear Event Log option, you must be in the Command Menu. To enter the Command Menu, press
when the display is in normal mode.
Step 1: Select Clear Event Log
1. Use and to scroll the cursor to “Clear
Event Log”.
2. Press to continue.
Step 2: Enter your passcode (if required)
Enter your passcode. See page 10 for instructions on
entering passcodes.
Step 3: Select the log to clear
•Use and to select the log you would like
to clear.
•Use and to select “yes” or “no”.
•Press to continue.
•The system will display the messages “Please stand-
by erasing log...” and “Log(s) cleared”” and will return
to the Command Menu.
- Command Menu-
4 Day/Night mode
5 Set Time
6 Clear Event Log
Enter passcode for
level 2 or higher:
- Select Log -
1 Alarm Log
2 Event Log
3 All Logs
Are you sure you
want to clear all
the entries in the
selected log(s)? Y
To Next Page
Loading...
Need help?
General
