MMX
TM
User Guide
33
Alternate Menu Option #3: Manual Control Enable
This option provides security on the panel control buttons by requiring the user to enter a passcode or activate a
key switch before a specific button will operate. This “manual control” feature is set up using the Configurator,
and can affect any number of control buttons. Selecting the Enable Required option in the Command Menu or
turning the key switch allows you to activate and deactivate this feature.
Selecting Manual Control Enable from the Menu
To select the Enable Required option, you must be in the Command Menu. To enter the Command Menu, press
when the display is in normal mode.
The display will now show the message “Manual control enabled” while in normal mode, and the panel will be in
a trouble condition. To check which annunciator manual control was enabled on, press the button. To
disable manual control, follow the same steps outlined above.
Selecting manual control enable using a key switch
You can set up the MMX
TM
to require the activation of a key switch instead of a passcode to enable manual
control. Once the key switch is operated, the display will show the message “Manual control enabled” while in
normal mode, and the panel will be in a trouble condition. To check which annunciator manual control was
enabled on, press the button. To disable manual control, reset the key switch.
Notes:
•You will see this option in the Command Menu only if your system has been
programmed for manual control.
•This feature does not change after a system reset.
Step 1: Select Manual Enable
1. Use and to scroll the cursor to “Man Ctrl
Enable”.
2. Press to continue.
Step 2: Enter your passcode
Enter your passcode. See page 10 for instructions on
entering passcodes.
Step 3: Enable manual control
1. The systems now asks you whether or not you would
like to enable manual control. Use and to
select “yes” or “no”.
2. Press to continue.
- Command Menu-
1 Reports
2 Bypass
3 Man Ctrl Enable
Enter passcode for
level 1 or higher:
Manual control
currently disabled.
Enable? Y
To Next Page
Loading...
Need help?
General
