MMX
TM
User Guide
13
Alarm Log
The Alarm Log reports on all alarm events. Alarm events are listed in order of the most recent event to the
earliest. The maximum number of recorded alarm log entries is 1000. Once the system reaches 1000 entries,
any new entry will cause 500 of the oldest entries to be deleted.
At this point the display will vary, depending on whether or not a printer is connected to the panel.
If a printer is not connected to the panel, the Alarm Log will print to the display.
• Use and to scroll the cursor through the log.
• Hold down for more information on the logged event.
Press to exit to the Reports Menu.
If a printer is connected to the panel, follow Step 2, below.
Event Log
The Event Log reports on all events: alarms, troubles, and button pushes. Events are listed in order of the latest
(most recent) event to the earliest. The maximum number of recorded event log entries is 2000. Once the
system reaches 2000 entries, any new entry will cause 1000 of the oldest entries to be deleted.
At this point the display will vary, depending on whether or not a printer is connected to the panel.
If a printer is not connected to the panel, the Event Log will print to the display.
• Use and to scroll the cursor through the log.
• Hold down for more information on the logged event.
• Press to exit to the Reports Menu.
Step 1: Select the Alarm Log
1. Use and to scroll to “Alarm Log”.
2. Press to continue.
Step 2: Print the Alarm Log
•To print the Alarm Log to the printer, press
when the cursor flashes beside “Printer”.
•To print the Alarm Log to the screen, press then
to select “Screen”. Follow the instructions
above to navigate the Alarm Log.
Step 1: Select the Event Log
1. Use and to scroll the cursor to “Event
Log”.
2. Press to continue.
- Reports Menu -
1 Alarm Log
2 Event Log
3 Current Levels
^
- Report to -
1 Printer
2 Screen
- Reports Menu -
1 Alarm Log
2 Event Log
3 Current Levels
^
To Next Page
Loading...
Need help?
General
