Secutron MMX-2003-12NDS User Manual

Front Panel Menu Operation
14
If a printer is connected to the panel, follow Step 2, below.
Current Levels
This option reports on the current levels of addressable devices.
If you view the Current Levels on the screen,
• Use and to scroll the cursor through the log.
• Press and hold for more information on the current level.
• Press to exit to the Reports Menu.
Step 2: Print the Event Log
•To print the Alarm Log to the printer, press
when the cursor flashes beside “Printer”.
•To view the Alarm Log on the screen, press
then to select “Screen”. Follow the
instructions above to navigate the Event Log.
Step 1: Select Current Levels
1. Use and to scroll the cursor to “Current
Levels”.
2. Press to select the Current Levels submenu.
Step 2: Print or View the Current Levels
•To print the Current Levels report to the printer, press
when the cursor flashes beside “Printer”.
•To view the Current Levels report on the screen,
press then to select “Screen”. Follow
the instructions above to navigate the Current Levels.
Step 3: Select loop number
•Select a loop number by using and to
scroll through the numbers, or
•Select all loop numbers by pressing . Wait five
seconds. Use and to scroll the cursor
through the loops.
- Report to -
1 Printer
2 Screen
- Reports Menu -
1 Alarm Log
2 Event Log
3 Current Levels
^
- Report to -
1 Printer
2 Screen
-Select Loop Number-
Loop: A
L L

Secutron MMX-2003-12NDS Specifications

General

Brand	Secutron
Model	MMX-2003-12NDS
Category	Control Panel
Language	English