Secutron MMX-2003-12NDS User Manual

Front Panel Menu Operation
24
At this point the display will vary, depending on your choice:
• If you selected “yes”, the display will either show the message “Input Zone bypassed” or “Input Zone
unbypassed”, then return to the Command Menu.
• If you selected “no”, the display will show the message “Operation cancelled” and will then return to the
Command Menu.
Unbypassing an active loop
When you unbypass a input zone that went into alarm while it was bypassed, you will see the following message:
If you select “yes” to unbypass this loop, the system will immediately go into alarm. To avoid this problem, press the
System Reset button before unbypassing the loop.
Step 2: Select a loop number
1. Use and to select the Node and CPU
number.
2. Press to continue.
Step 3: Bypass the loop
1. The systems now asks you whether or not you would
like to bypass or unbypass the input zone.
Use and to select “yes” or “no”.
2. Press to continue.
-Select Input Zone-
Node: 1
CPU: 1
Nd: __ CPU:__ Zn:__
Bypass? Y
Warning: This zone is
active. Do you really
want to unbypass
it? Y

Secutron MMX-2003-12NDS Specifications

General

Brand	Secutron
Model	MMX-2003-12NDS
Category	Control Panel
Language	English