MMX
TM
User Guide
27
Press or to switch to the Main Walk Test screen.
Press to exit the Walk Test at anytime.
Silent Test
During this test, alarm and trouble activation of any input device will be recorded by the system but it will not
sound the signals. For the system to register a trouble, you must keep the device in a trouble condition for 10
seconds.
Step 5: Device View During the Walk Test
During the Walk Test the device display will be as
shown.
A = total number of alarm events for the device.
T = total number of trouble events for the device.
Step 1: Select Silent Test
1. Use and to scroll the cursor to “Silent
Test”.
2. Press . The test will now begin.
Step 2: Select duration of Walk Test
1. The default duration of Walk Test is 6 hours. To
choose another time duration, use the and
to scroll the cursor to the desired duration time.
Valid range is from 1 hour to 12 hours.
Press to select the Walk Test duration.
Step 3: Start the Walk Test
Start or Resume Test for device inspection.
1. Select Start to begin a Walk Test.
2. Select Resume to continue the Walk Test.
As the test runs, the Alarms and Troubles count will
increase as they are recorded (logged) during the
Audible Test.
Press to end the walk test at any time.
Nnn Lnn Adrnnnnnnnn
A: nnn T:nnn
Tag 1
Tag 2
- Walktest -
1 Audible Test
2 Silent Test
- Walktest -
Timeout 6 hours
- Walktest -
1 Start
2 Resume
To Next Page
Loading...
Need help?
General
